Staff blog

 

Thank you for your help

2014-03-27
It becomes gradually warm and is the season of cherry blossoms soon
Speaking of spring, there is the new encounter, but there is it even at the time of sad parting.
I am one of the inside, too. . . I will leave the bit
Nothing understood the manufacturing industry at all and entered the company as an office worker, but acted for full seven years.
It was just short if I thought as it was long, ...
Even if say an office worker, is not desk work all the time, is coming and going in a factory
When is almost busy as stand, and worked; wearily
The life that is busy though I sleep if I work till late every day and return to the house.
Whenever repeat age, do not get the fatigue, too; ...
But, as for what it had it to think not to want to go that I wanted to be absent from work and was able to continue so far, as for the bit, delightful
It may be hard to think, but thinks that it is fun though I work that I might not continue it if not fun.
I hardly work for a transfer for last one month
"a, after all address menakerebayokattakanaa ..."
I might think of this, but aim at the next aim as it is what I decided by oneself
Three new employees begin a bit and think that I grow up more and more.
I want to see whether a company continues growing up this time from the outside
 
It was such a short time, but thank you very much for your help.
I would like a bit from now on.
 
An office worker: It was S water
 
PS.  S water with what! It was grown by the first intra-office marriage in a bit.
    Forever in happiness 

I was taken care of for half a year

2014-03-27
After coming for a bit in the training, already for half a year. . .
I was taken care of for half a year
It was full of uneasy feelings before coming for the training,
Everybody was very gentle and became kind and told me and was able to complete the low byte that was a graduation problem belonging to safely
In addition, I had you see trouble in not only the work but also the private and was able to spend very substantial half a year.
Thank you
 
Yokokura

Another ten years

2014-03-08
I enter the company, and it is ten years.
The company in front was doing cylinder abrasion mainly in the company of the die.
In the bit, knives (a low parttimer belonging to and molding of the tip) for the industry process various products.
When it entered the company, it was a machine to look at for the first time, but it was tired from early ... moving an arm all day to be used to a machine as it was a general-purpose computer
I could read the drawing, but time suffered from the drawing of the knife unlike the thing which I looked at so far to get used
I was used to the processing of the product with the angle of various knives now
Sometimes make the defectiveness, but ...
= 3 that the work except the manufacturing increases recently, and there is the thing which is not so good at it, but I study in various ways and want to try it hard
 
I did it under M.

White Valentine

2014-02-24
It was the snow which was terrible on February 14
A lot of damage was reported in news, but was everybody all right?
The people whom it was met for various damage. I visit it than all the employees.
 
This year begins and is the second heavy snow
I felt this snow to be heavier than the last snow.
I am going to work, and a carport and a plastic greenhouse are broken with snowy heaviness, and ... nature is a menace
The bit was closed under the influence of snow on Monday on 17th, too (@ _ @;)
On Tuesday at first from snow shoveling. ... that new snow shoveling was great
Much snow is still left.
I go to work a little more with caution without relaxing and will go to school.
 
By the way, I found such a chocolate this year on Valentine's Day. Cute ...
Matryoshka doll chocolate! It is Yoshimoto ichi push
It is pleasure that I present it to general affairs girl, but see the face which I enjoy that I choose you and am pleased with every year.
It was good this year to have you please
 
(∞) / which was an origin of reason

Tool abrasion ... C-40

2014-02-11
Hello
It is 2511 of the tool abrasion position.
 
Tool abrasion ... oneself processes blade charge account, sukui sides with a machine called C-40 mainly.
As C-40 is hand-operated operation, the cut speed is decided for own sense (((ρ (._.))))
I process it it is the speed that does not become poor and to process it efficiently as soon as possible while thinking every day.
I want to think from now on to process it efficiently
 
<nom de plume: 2511>
■Business item
Cutting tool

Brazing byte, total model byte
I put a molding byte, a groove, and a circle works part-time
Slotter byte
Hale processing byte
Slow away tip
Molding tip, total model tip
Special throw away tip
Heiss throw away tip
Knife for the industry
Cutter blade, cutter blade
taimakogu
Crush blade, fixed blade, rotary blade
Punch dice suritta
Roll centerless blade
Carp ring pin wire line guide
Brazing parts
The point of contact, electrode, abrasion parts-resistant

Design, production, sale of the special machine tool
Improvement suggestion of the knife
Cutting, abrasion processing of precision parts
Bite
〒370-2322
343, Iwasome, Tomioka-shi, Gunma
TEL: 0274-62-1744
FAX: 0274-63-0865